Test and Certification.
About test and certification.
Qamcom provides end-to-end support throughout the entire testing and certification process. With our advanced in-house labs and the capability to set up on-site EMC labs for simpler measurements, we offer a flexible and comprehensive approach.
Our team of specialists brings years of experience, deep expertise, and a problem-solving mindset, ensuring a holistic perspective across EMC, radar, antenna and radio testing.
Our team of specialists brings years of experience, deep expertise, and a problem-solving mindset, ensuring a holistic perspective across EMC, radar, antenna and radio testing.
Why test and certify with Qamcom?
Smarter testing.
Lower costs.
Catch issues early, avoid redesigns, and reduce development expenses.
Faster certification.
Quicker market entry.
Meet industry standards without delays and get your product to market faster.
Proven performance.
Stronger market success.
Reliable testing means higher customer trust, fewer recalls, and a competitive edge.
Selection of services.
We provide fast, cost-effective, and reliable testing services, backed by a team of experienced engineers with years of hands-on expertise in EMC, radio, radar, and antenna testing. Our deep industry knowledge ensures precise measurements, efficient troubleshooting, and seamless compliance with global standards.
Complete CE marking & Certification support
- Full CE marking package deals covering all necessary compliance aspects.
- Certification for safety, radio, EMC, RoHS, REACH compliance.
- Assistance with standards, cables, labels, manuals, and Declarations of Conformity (DoC).
- Global market access support – assistance with international certifications (FCC, IC, UKCA, CB Scheme, VCCI, KC, etc.).
Testing & Measurement services
- EMC, radio, radar, antenna, temperature & humidity measurements.
- Ensure compliance with industry standards.
- Advanced instruments & software.
- Close cooperation with accredited test houses for certified EMC, radio, and safety testing.
- Assistance in setting up on-site EMC/RF test environments.
Regulatory requirements & Standards
- EMC – ITE, Home, Industry, Tools, Medical, NEBS, Vehicles, MIL-STD
- Radio – WLAN, BT/BLE, P-t-P, Radar, SRD
- Safety – Electrical, Laser, IP, IK, RF exposure
Design & Engineering support
- Simulation & Design services – PCB, EMC, RF & Antenna.
- Radio chip & Antenna selection – Helping you choose the best solution for performance & compliance.
Additional compliance services
- Cables & Labels – Complete label design with all required markings & data.
- Correct cable selection – Minimize radiation issues.
- Manual compliance – Ensure legal information is included for different markets.
EMC & RF troubleshooting
- Root cause analysis of EMC failures.
- Design improvements for better EMI/EMC performance.
- Shielding, filtering, and grounding solutions.
The EMC Chamber.
Enter an anechoic chamber forged for precision. Built for high-performance radio, EMC, antenna, and radar testing, it provides a controlled, interference-free space where signals are tested, calibrated, and perfected.
Its design supports everything from compliance testing to cutting-edge innovation. Whether you need industry-standard verification or advanced R&D, this chamber delivers—fast, reliable, and uncompromising.
Its design supports everything from compliance testing to cutting-edge innovation. Whether you need industry-standard verification or advanced R&D, this chamber delivers—fast, reliable, and uncompromising.
EMC CHAMBER
Customized or standardized testing
Tell us what you need, and we’ll handle the rest. Our engineers work with you to define test parameters, conduct measurements, and analyze results – ensuring accurate insights and compliance with industry standards.
- Test plans based on standards or fully customized based on your specifications
- Expert execution and data analysis
- Troubleshooting and design recommendations
EMC CHAMBER
Chamber rental
For those with in-house expertise, our chamber is available for rent. A Qamcom engineer will be present at all times to provide assistance, ensuring smooth operation and accurate data collection.
- Full access to state-of-the-art testing facilities
- On-site technical support for setup and troubleshooting
- Maintain control of your own testing process
The Team.
Behind every test, calibration, and certification stands a team of seasoned engineers with deep expertise in EMC, radio, radar, and antenna testing. With years of hands-on experience, they bring technical precision and problem-solving skills to ensure your product meets the highest industry standards.
EMC CHAMBER
Main offerings.
From compliance testing to advanced performance optimization, we provide precise and reliable measurements for EMC, radio, radar, and antenna systems. Our cutting-edge anechoic chamber, expert engineers, and industry-leading tools ensure your product meets the highest standards—fast and efficiently.
EMC testing.
Crush the noise. Master compliance.
Ensure your product meets global EMC standards with precise and accurate testing and expert troubleshooting. We help you detect interference, improve design, and achieve certification – quickly and reliably.
Radiated & Conducted emission
- Radiated emission (9 kHz – 40 GHz)
- Conducted emission AC, DC & Signal Ports (9 kHz – 30 MHz)
Immunity testing
- ESD up to 9 kV contact, 16.5 kV air discharges
- Radiated immunity 80 – 1000 MHz & 1 – 67 GHz
- EFT burst – AC, DC & signal ports up to 4 kV @ 5 kHz
- Surge – AC, DC & signal ports up to 4 kV, 1.2/50 µs
- RF CM 150 kHz – 80 MHz, AC, DC & signal ports up to 10 Vrms
Power & Voltage testing
- Power frequency magnetic field immunity up to 10 A/m 50 Hz
- Voltage dips and interruptions – AC & DC ports
Radar calibration.
Precision in every pulse.
Ensure your radar system operates with maximum accuracy and reliability. We provide high-precision calibration, beam analysis, and steering vector measurements for both development and production.
High-frequency measurements
- Measurements up to 90 GHz
Steering vector calibration
- Passive corner reflectors
- Active sources
- Custom transponders
Beam analysis & Debugging
- Radar target simulators
- High-resolution measurements over a full hemisphere
- Simplified boresight calibrations for production
Radio performance.
Dial in the power. Own the spectrum.
Optimize your radio performance with precise and accurate measurements and in-depth analysis. We test everything from spurious emissions to receiver sensitivity, ensuring compliance and peak efficiency across various wireless technologies.
Signal integrity & Spectrum analysis
- Frequency stability (ppm)
- Occupied bandwidth (MHz)
- Power spectral density (dBm/MHz)
- Spurious emissions (9 kHz – 90 GHz, extendable to 170 GHz)
Transmission & Reception performance
- Radiated power (dBm)
- Transient power (dBm)
- Receiver sensitivity (dBm)
- Receiver blocking (dB)
- Duty cycle (%)
Environmental & Regulatory testing
- Low voltage conditions
- Testing in temperature chamber (-70 to 180°C)
- Polite spectrum access
Antenna characterization.
Tune the waves. Command the signal.
Evaluate antenna performance with accurate measurements, radiation pattern analysis, and efficiency assessments. We provide comprehensive testing for design validation and optimization.
Radiation pattern analysis
- 2D & 3D radiation pattern measurements
- Azimuth and elevation cuts (H-plane & E-plane patterns)
- Full sphere (3D) pattern measurements
Performance metrics
- Main beam direction & beamwidth (Half-Power Beamwidth, HPBW)
- Gain measurements
- Side lobe level (SLL) analysis
- Cross-polarization discrimination (XPD)
- Front-to-back ratio (F/B ratio)
- Radiation efficiency estimation
- Return loss measurements
Our labs.
Gothenburg
Electronics lab • Mechanics lab • EMC • Radio • Radar • Antenna lab
Stockholm
Electronics lab • Optics lab
Linköping
Electronics lab • Mechanics lab • 10 m RF • Antenna measurement lab
Selection of instruments & software at Qamcom
- Spectrum analyzer R&S FSW 2 Hz–67 GHz (extendable up to 170 GHz)
- Signal generator Anritsu DC to 70 GHz
- Network analyzers from 5 Hz to 90 GHz
- Various antennas from 9 kHz up to 90 GHz
- Power meters 10 MHz–90 GHz
- Environmental test chambers (-70 to 180°C)
- Various oscilloscopes such as:
- R&S RTO64, 4-Channel
- R&S RTO1044, 4-Channel
- R&S Elektra EMC Software
- Ansys HFSS, CST Studio, Comsol, PSpice, LTSpice, Altium, Cadence, KiCad, SolidWorks, Fusion, Keysight Pathwave
Environmental test chambers
Qamcom’s facilities include three in-house environmental test chambers, enabling rigorous testing under controlled conditions. These chambers support a wide range of environmental simulations, including extreme temperatures, humidity variations, and thermal cycling.
This capability ensures that products and systems can be validated for reliability and performance in demanding conditions, such as aerospace, automotive, and industrial applications.
This capability ensures that products and systems can be validated for reliability and performance in demanding conditions, such as aerospace, automotive, and industrial applications.
Thermotron S-32-8200-2-3
- Temperature range: -70…+180°C
- Humidity: 10…98%
- Volume: 906 l
CTS C-40/200
- Temperature range: -40…+180°C
- Humidity: 10…98%
- Volume: 200 l
Heraeus HT 7020
- Temperature range: -70…+180°C
- Volume: 106 l
Standards & Test methods.
Directives / Government regulations |
EU – EMCD, LVD, RED, RoHS, MD, Maritime, IVDD, MDD & EMF |
North America – FCC, IC, UL & ETL |
Asia – SRRC, VCCI/MIC, KC & NCC |
Other markets – Brazil, Australia and New Zealand |
Vehicles – E-marking |
Emission coverage |
Radiated emission (9 kHz–40 GHz) |
Conducted emission (9 kHz-30 MHz) |
Spurious emission (9 kHz-90 GHz) |
Test methods |
EN 61000-4-2 (Electrostatic discharge) |
EN 61000-4-3 (Radiated RF electromagnetic field immunity) |
EN 61000-4-4 (Electrical fast transient/burst immunity test) |
EN 61000-4-5 (Surge immunity test) |
EN 61000-4-6 (Conducted RF immunity test) |
EN 61000-4-8 (Power-frequency magnetic field immunity test) |
EN 61000-4-9 (Pulsed magnetic field immunity test) |
EN 61000-4-11 (Voltage dips, short interruptions, and voltage variations immunity test) |
EN 61000-4-20 (Emission and immunity testing in TEM cells / stripline) |
EN/ETSI, FCC/ICES/RSS/RS/UL, IEC/CISPR/IEEE/ISO/ICNIRP & Mil-Std, including: |
EN 55011 (Industrial, scientific, and medical equipment) |
EN 55014-1/-2 (Household / tools) |
EN 55032 (Multimedia equipment) |
EN 55035 (Multimedia equipment immunity) |
EN 61000-1/-2/-3/-4/-8 (Residential / industry) |
ETSI EN 301 489 Series |
ETSI EN Radio Standards |
FCC part 15 / RSS-Gen / ICES-003 |
